#Install clover bootloader on virtual machine how to
#Install clover bootloader on virtual machine install
#Install clover bootloader on virtual machine series
#Install clover bootloader on virtual machine mac
#Install clover bootloader on virtual machine windows

#Install clover bootloader on virtual machine how to

(i5-7500 and i3-9100F both have 4 cores and close speed)īelow is a brief guide on how to pick your hardware This spec is almost identical to iMac 18,2.

#Install clover bootloader on virtual machine mac

You can look at Mac spec on this and copy their build (or at least similar)įor example, I’m using Intel Core i3-9100F 3.6GHz, MSI RX570 4GB Graphic card and 16GB RAM for my build. If you choose to build hackintosh from scratch, you should consider picking hardware that are supported by Apple for maximum compatibility and easier setup. And with the right kexts selection and good boot configuration, your hackintosh will work like a real Mac. Also all the kexts, boot argument and device configuration will be in the same place so you’ll know where to fix them when something goes wrong. By leaving the OS partition intact, we’ll be able to use this partition to boot with any Mac or other vanilla hackintosh. This is the main difference between multibeast/unibeast and vanilla method. But vanilla method will place all the extra kexts in EFI partition and inject them during the boot instead. The original kexts of macOS are resided in /system/library/extensions of the OS partition. On the other hand, AMD Ryzen CPU, Nvidia cards and Realtek Wifi cards are much more tricky to setup and require several kexts to work.

#Install clover bootloader on virtual machine series

For example, Intel Core series CPU, AMD RX graphic Cards and Broadcom Wifi card are known to natively supported by the macOS and don’t require any extra kexts to work. If your hackintosh build has Apple supported hardware, you will only need a few kexts. This is when we’ll inject our manually selected kexts files into the OS.

#Install clover bootloader on virtual machine windows

Installing Windows on drive A, macOS on drive B)Īfter the bootloader and SMC validation, the OS will start loading drivers.

#Install clover bootloader on virtual machine install

It also give you an option to install multiple OS and boot them selectively. Clover allows you to customize boot a rguments, patching firmwares, changing device description/serial numbers, system parameters and several important things. First Clover will allow macOS to load its bootloader, then start injecting the “fake” info and kexts. To inject the information and kexts into macOS, we’ll need “ Clover” boot manager. And here comes our first and mandatory kexts for all hackintosh – “ FakeSMC” Since hackintosh doesn’t have SMC, we’ll need to fake it. This is to ensure the OS that it’s running on a genuine Apple machine and also provide the hardware configuration. When you power up a real Mac, a system management controller chip (aka “ SMC“) will send information of all your hardware to macOS. Thus you’ll get an identical (or almost identical) experience with using a real Mac. When booting up, these kexts and information will be injected into macOS to make it think it’s running on Apple’s hardware. Vanilla hackintosh don’t have this problem because all the kexts and configurations will be placed in EFI (Extensible Firmware Interface) partition which is separate from OS partition. You’ll miss the opportunity to learn about boot process, EFI, Clover, how to setup virtual SMC, SMBIOS, etc.

Limited options for a unique/unsupported hardware build (ex.

When something’s broken, you are clueless where to start looking.

Limited options to troubleshoot your Mac since everything has been done by the Multibeast.

Since OS partition is tampered, you can’t use it to boot with real Mac or any other vanilla hackintosh.

Updating macOS could break or remove your hackintosh config.

This works well for most of the time but there are some catches. Multibeast/Unibeast method modify the macOS by placing all the kernel extensions or “ kexts” inside (/system/library/extensions) along with some other modifications. Then place them into a separated EFI partition, leaving macOS main partition intact and identical to a real Mac. And another one is “Vanilla” install (like Vanilla JavaScript) which you have to prepare all the required kernel extensions and setup configuration file from scratch. Multibeast/Unibeast, etc.) This is the easiest way to build a hackintosh for beginners since the installer does most of the jobs for you. First is to use a universal installer to install a “modified” version of macOS (ex. There are 2 popular ways to install macOS into non-Apple hardware. We do not encourage the violation of Apple’s EULA or any commercial usage of hackintosh *** What is Vanilla Hackintosh? Mainly for anyone who would like to try macOS experience before buying a real mac or get a better understanding of Mac boot process. *** Disclaimer: This vanilla hackintosh guide/tutorial is only for educational purpose.